How To Take Off Windshield Wiper Arm

If you’re experiencing problems with your windshield wipers and want to replace them, you need to know how to take off windshield wiper arm. It may seem like a daunting task, but it’s relatively simple if you follow the right steps. In this article, we’ll guide you through the process of removing your windshield wiper arm, so you can replace it with a new one.

Step 1: Park Your Car in a Safe Location

Before you start, park your car in a safe location, away from traffic. Make sure the engine is turned off, and the handbrake is engaged. This is important to ensure your safety while working on the vehicle.

Step 2: Lift the Wiper Arm

Lift the wiper arm away from the windshield, so it’s perpendicular to the glass. Make sure it’s firmly in place, so it doesn’t snap back and hit the windshield. This will give you better access to the wiper arm attachment.

Step 3: Locate the Wiper Arm Attachment

Locate the wiper arm attachment, which connects the arm to the wiper motor. It’s usually located at the base of the wiper arm, near the windshield. This is where you’ll need to focus your attention to remove the wiper arm.

Step 4: Remove the Wiper Arm Attachment

Using a wrench or pliers, loosen the nut that secures the wiper arm attachment. You may need to apply some force to loosen the nut, but be careful not to damage any other parts of the vehicle. Once the nut is loose, you can remove it by hand.

Step 5: Wiggle and Pull the Wiper Arm

Wiggle the wiper arm back and forth to loosen it from the wiper motor shaft. Once it’s loose, pull the wiper arm away from the shaft. If it’s stuck, you may need to use a wiper arm puller to remove it. Be careful not to damage the wiper motor or the windshield while removing the arm.

Step 6: Inspect the Attachment Point

Inspect the attachment point for any signs of wear or damage. If there are any cracks or other damage, you may need to replace the wiper motor shaft or the entire assembly. It’s important to make sure everything is in good condition before installing the new wiper arm.

Step 7: Install the New Wiper Arm

Once you’ve removed the old wiper arm, it’s time to install the new one. Make sure it’s the correct size and type for your vehicle, and that it fits securely on the wiper motor shaft. Slide the new wiper arm onto the shaft, and tighten the nut by hand.

Step 8: Test the New Wiper Arm

Before you finish up, test the new wiper arm to make sure it’s working properly. Turn on the wipers and check that they’re moving smoothly and not hitting the windshield frame. If everything looks good, you’re ready to hit the road with your new wiper arm.

Conclusion

Taking off a windshield wiper arm may seem difficult, but it’s a simple process if you follow the right steps. Park your car in a safe location, lift the wiper arm, locate the attachment, remove the attachment, wiggle and pull the wiper arm, inspect the attachment point, install the new wiper arm, and test it out. With these instructions, you can easily replace your wiper arm and keep your windshield clean and clear.